Categories

Changes since 4.02 f/w:

__Changes since 6.06 f/w:__
*Last frame frozen and UI notification feature
*Auto Logout feature
*Use saved monitors EDID feature
*Rebooting RX should not cause TX to lose USB descriptor
*Laggy mo

Changes since 1.0 f/w:
- Fixed: Updating of the UI Settings failed, triggering a RETRY and CONFLICT before updating
- Fixed: USB not functional when ALIF4000 RX is connected to ALIF TX (ALIF1002, AL

Changes since 3.01 f/w:
*Added a workaround for an error in the EDID of a LG Ultrawide 38UC99 monitor (3840 x 1660) which did not display video unless active sync is enabled.
*Rebooting the AIM Mana

Changes since 5.05 f/w:
*Need to turn auto negotiate to OFF(None) for SFP’s on network switches
*RX unable to communicate with TX in multi subnet matrix (Self-managed mode)
*DHCP classless routes

Changes since 3.01 f/w:
*Extended channel hotkeys (0-99). Requires AIM version v4.11.45021
*Support for Channel Banner positioning from AIM.
*Device status for the DP Audio and Transparent USB co

Changes since 1.1 f/w:

__New Feature:__
*Transparent USB2.0 High-speed link The ALIF4000 contains hardware that allows a full 480Mbps USB2.0 high-speed point to point link to be formed. In this V2

Changes since 1.1 f/w:

__New Feature:__
*Support for 5k resolutions, including
**5120 x 2880@30hz
**5120 x 2160@30hz
**5120 x 1440@60hz
*High Frame Rate Support. Up to 240Hz (1920x1080)
*Di

We have had some instances where endpoints were not being seen properly by AIM when using a Cisco 3850 switch. Upon investigation, it was discovered that if the interfaces are left as default (i.e. no

Fixes two issues from 4.5; losing USB with certain HP machines on reboot and having two transmitters video pointing to one receiver.

Fixes an intermittent loss of USB, particularly when used in conjunction with a CCS-PRO. Requires CCS-PRO firmware upgrade.

V4.9 is a maintenance release which has addressed issues with the OSD (On screen display) and USB support of newer devices.
One new feature is the ability to stack the dual screen view via VNC on the

__Products__
This firmware update is for the ALIF1002T/R, ALIF2000T/R, ALIF2002T, ALIF2020T/R and ALIF2112T

__Changes since version v4.9__
*Fixed support for Elgato Stream Deck on latest software

__Changes since v1,1__
*Added new VDI Viewers, VNC, HTML and Terminal (SSH)
*ALIF1000/2000 range of products including support for CSS-PRO units, USB mass storage devices and many more NON HID devic

A little-known feature on the AV4PRO is that the hotkeys will filter down to cascaded AV4PRO switches. For example, if you have two switches, one is connected to port 1 of the master/top switch. So, h

Adds the ability to disable port cycling by hotkey.

After January 2018, it is not possible to add new or factory reset endpoints to the AIM Manager due to a 32-bit rollover problem when generating 30 year SSL Certificates. They are required by both the

Changes since 4.9 f/w:
*Adds support for ALIF4000 V3.0 release which includes
**DisplayPort Audio – up to 8 channels on both heads
**Independent control of the transparent high-speed USB
**Sup

Changes since f/w v4.11.45012:
*After upgrading to 4.11, some receiver models (ALIF1002R, ALIF2020R, ALIF2000R) that were disconnected and were not previously running v4.9 firmware, will be completel

Changes since 4.11 f/w:
*Clearer on-screen instructions for RDP Login credential page for ALIF3000
*Removal of RDP transmitters from statistics page as they are not applicable
*Long Receiver names

This is update is for AIM-XX and ASP-001

Changes since v4.12/v4.13
- DeviceDaemon logging modified to prevent excessive log files sizes.
- System packages updated for Upgrade system for future re

''text''

FIxes:
- ALIF100T-VGA could not be added to the AIM Manager.

Features:-
- Support for the new ALIF4021R and ALIF4021T 4k Infinity endpoints.

This update is for AIM-XX and ASP-001

__Changes since v4.15__
*Added support for new ALIF2100 series
*Automated login feature (Licensed Feature)
*API updates – including AIM promotion, replaci