Changes since 3.00 f/w:
- Extended channel hotkeys (0-99). Requires AIM version v4.11.45022 or above.
- Support for Channel Banner positioning from AIM.
- Device status for the DP Audio and Transparent USB connections were not reported to the AIM.
- Issues resolved from firmware v3.0 only:
- A point to point mode connection could not be made.
- CCS-PRO - Absolute mode did not work on the OSD.
The firmware release is available from our main website using the link below:-
This firmware release may have been superseded and no longer available for download. Always check to make sure that you are running the latest firmware version. The version was correct at the time of writing this article.