| Name | Type | Category |
|---|---|---|
|
ALIF: Cisco Network Switch configuration
We have had some instances where endpoints were not being seen properly by AIM when using a Cisco 3850 switch. Upon investigation, it was discovered that if the interfaces are left as default (i.e. no |
article | AdderLink Infinity |
| ALIF: Compatibility Matrix | wiki | AdderLink Infinity |
| ALIF: Configuring OSD Channel Hotkeys | wiki | AIM |
| ALIF: Default IP Addresses | wiki | AdderLink Infinity |
| ALIF: DHCP | wiki | AdderLink Infinity |
| ALIF: DHCP Option 125 Application | wiki | AdderLink Infinity |
| ALIF: Enabling Active Directory | wiki | AdderLink Infinity |
| ALIF: Enabling Local Feed Through | wiki | AdderLink Infinity |
| ALIF: Enabling Remote Support | wiki | AdderLink Infinity |
|
ALIF: Endpoint f/w v4.6.41576
Fixes two issues from 4.5; losing USB with certain HP machines on reboot and having two transmitters video pointing to one receiver. |
article | AdderLink Infinity |
| ALIF: Endpoints (Transmitters and Receivers) | wiki | AdderLink Infinity |
|
ALIF: Endpoints f/w v4.6.42069
Fixes an intermittent loss of USB, particularly when used in conjunction with a CCS-PRO. Requires CCS-PRO firmware upgrade. |
article | AdderLink Infinity |
|
ALIF: Endpoints f/w v4.9.44052
V4.9 is a maintenance release which has addressed issues with the OSD (On screen display) and USB support of newer devices. One new feature is the ability to stack the dual screen view via VNC on the |
article | AdderLink Infinity |
|
ALIF: Endpoints f/w v5.0.47185
__Products__ This firmware update is for the ALIF1002T/R, ALIF2000T/R, ALIF2002T, ALIF2020T/R and ALIF2112T __Changes since version v4.9__ *Fixed support for Elgato Stream Deck on latest software |
article | AdderLink Infinity |
| ALIF: Endpoints Firmware Versions | wiki | AdderLink Infinity |
| ALIF: Endpoints with AIM Quick Start Guide | wiki | AdderLink Infinity |
| ALIF: Example of using SNMP on AIM | wiki | AdderLink Infinity |
| ALIF: FAQ | wiki | AdderLink Infinity |
|
ALIF: AIM - Event and Connection Log archive.
When upgrading the firmware, the Event and Connection logs are cleared. |
article | AdderLink Infinity |
|
ALIF: AIM - Using the 192.168.1.x network range.
Be careful if you are using the 192.168.1.x network range for endpoints. We have seen a problem where if an endpoint is given 192.168.1.42, it cannot be added to the AIM Manager. This is because 192.1 |
article | AdderLink Infinity |
|
ALIF: AIM - Web browser compatibility
Known to affect 4.x firmware. When configuring the AIM's web interface, it is recommended that you use an up to date web browser. If using Internet Explorer 11 or below, configuration pages like th |
article | AdderLink Infinity |
| ALIF: AIM ASP-001 Power Button | wiki | AIM |
| ALIF: AIM Controller - API Demo | wiki | AdderLink Infinity |