Loading...
 

Category: Products

Products
Hide subcategories objects

..
Name Type Category
ALIF: ALIF3000 f/w 1.01
Changes since 1.0.1:
*Added Microphone support for RDP
*Added feature to make the banner movable to 6 positions
*Backup firmware version was not reported to AIM.
*Audio volume was not set correctl
article ALIF3000
ALIF: ALIF3000 f/w 1.1.0
__Prerequeistes__
This update requires that the AIM Manager is running v4.12 or above.

__New Features__
*The 3rd copper network interface can be Static or allocated DHCP. This is set via the AIM
article ALIF3000
ALIF: ALIF3000 FAQ
wiki ALIF3000
ALIF: ALIF4000 "MiniMatrix" Quick Start Guide
wiki ALIF4000
ALIF: ALIF4000 FAQ
wiki ALIF4000
ALIF: ALIF4021 f/w 1.01
Changes since 1.0 f/w:
- Fixed: Updating of the UI Settings failed, triggering a RETRY and CONFLICT before updating
- Fixed: USB not functional when ALIF4000 RX is connected to ALIF TX (ALIF1002, AL
article AdderLink Infinity
ALIF: ALIF4021 f/w 4.01
Changes since 3.01 f/w:
*Added a workaround for an error in the EDID of a LG Ultrawide 38UC99 monitor (3840 x 1660) which did not display video unless active sync is enabled.
*Rebooting the AIM Mana
article ALIF4000
ALIF: ALIF4021: f/w 3.01
Changes since 3.01 f/w:
*Extended channel hotkeys (0-99). Requires AIM version v4.11.45021
*Support for Channel Banner positioning from AIM.
*Device status for the DP Audio and Transparent USB co
article ALIF4000
ALIF: ALIF4021:f/w 2.02
Changes since 1.1 f/w:

__New Feature:__
*Transparent USB2.0 High-speed link The ALIF4000 contains hardware that allows a full 480Mbps USB2.0 high-speed point to point link to be formed. In this V2
article AdderLink Infinity
ALIF: ALIF4021:f/w 3.00
Changes since 1.1 f/w:

__New Feature:__
*Support for 5k resolutions, including
**5120 x 2880@30hz
**5120 x 2160@30hz
**5120 x 1440@60hz
*High Frame Rate Support. Up to 240Hz (1920x1080)
*Di
article ALIF4000
ALIF: API
wiki AdderLink Infinity
ALIF: Cisco Network Switch configuration
We have had some instances where endpoints were not being seen properly by AIM when using a Cisco 3850 switch. Upon investigation, it was discovered that if the interfaces are left as default (i.e. no
article AdderLink Infinity
ALIF: Compatibility Matrix
wiki AdderLink Infinity
ALIF: Configuring OSD Channel Hotkeys
wiki AIM
ALIF: Default IP Addresses
wiki AdderLink Infinity
ALIF: DHCP
wiki AdderLink Infinity
ALIF: DHCP Option 125 Application
wiki AdderLink Infinity
ALIF: AIM f/w v4.11.45012
Changes since 4.9 f/w:
*Adds support for ALIF4000 V3.0 release which includes
**DisplayPort Audio – up to 8 channels on both heads
**Independent control of the transparent high-speed USB
**Sup
article AIM
ALIF: AIM f/w v4.11.45022 (Hotfix)
Changes since f/w v4.11.45012:
*After upgrading to 4.11, some receiver models (ALIF1002R, ALIF2020R, ALIF2000R) that were disconnected and were not previously running v4.9 firmware, will be completel
article AIM
ALIF: AIM f/w v4.12.10041
Changes since 4.11 f/w:
*Clearer on-screen instructions for RDP Login credential page for ALIF3000
*Removal of RDP transmitters from statistics page as they are not applicable
*Long Receiver names
article AIM
ALIF: AIM f/w v4.15.10005
This is update is for AIM-XX and ASP-001

Changes since v4.12/v4.13
- DeviceDaemon logging modified to prevent excessive log files sizes.
- System packages updated for Upgrade system for future re
article AIM
ALIF: AIM f/w v4.8.42924
''text''
article AdderLink Infinity
ALIF: AIM f/w v4.8.43178
FIxes:
- ALIF100T-VGA could not be added to the AIM Manager.
article AdderLink Infinity
ALIF: AIM f/w v4.9.3435
Features:-
- Support for the new ALIF4021R and ALIF4021T 4k Infinity endpoints.
article AdderLink Infinity
ALIF: AIM Firmware Versions
wiki AIM