Category: Products

The latest v2 firmware for the IPEPS+ adds Virtual Media support. The new function is not compatible with the DDX and as a result, also causes the mouse to stop working if you use Absolute mode. Dis

The following products are end of life with immediate effect. The EOL part numbers and recommended replacements are shown in the following table.

ALIF: ALIF4001 & ALIF4021 f/w 6.06
Changes since 6.04 f/w:
*UI becomes unusable with persistent "connection lost" if user password changed.
This effected units in either the self-managed matrix mod

ALIF: ALIF210x & ALIF212x f/w 6.06
Changes since 6.04 f/w:
*UI becomes unusable with persistent "connection lost" if user password changed.
This effected units in either the self-managed matrix mod

Changes since f/w: 1.03
- EDID is parsed to ensure that no unsupported modes are included before passing them to the host.
- Fixed Video Input Definition byte in EDID
- Add support for GigaLight 1

Changes since f/w: 1.03
*FIxed a web 404 error when navigating the interface
*Rebooting lost the video on some hosts.

Changes to f/w: 1.05
*Video blanking on new RX PCBs

Previous versions:
*XD614 – v1.10
*XD641 – v1.10
*XD642 – v1.12

__Issues Resolved__
*Keyboard issues in the BIOS with XD642
*Upgrade hangs at 99%
*Hot keys are passed through to the hos

*TX local feed-through daisy chain with Dell U2415 DP1.2 video doesn’t recover if the TX is rebooted
*Local video timings are not calculated correctly if the source video was not connected.
*Video

*Upgrade failure observed about 1 in 5 attempts
*Local video timings are not calculated correctly if the source video was not connected.
*XD614 Video loss after a period time-Link led on RX blinking

Changes since 1.04 f/w:
*Resolved: DP1 Link Oversubscribed error when monitors are reconnected to a MST hub
*Resolved: Missing video when local display is connected to a MST transmitter
*Resolved:

*Local Video timings are not calculated correctly
*Video loss after being in use for a period of time
*Restarting a Mac can cause the Tx to crash

Changes since 1.04 f/w:
*The monitor's EDID is manipulated if reported above 8-bit colour to ensure compatibility.
*Resolved: Mouse scroll wheel events are not passed to host PC
*Added support for

*Local Video timings are not calculated correctly
*Video loss after being in use for a period of time
*Restarting a Mac can cause the Tx to crash

Changes since 1.04 f/w:
*Fixed: Video occasionally blanks out
*Fixed: Displays sometimes lost upon server reboot
*Fixed: Mouse scroll wheel events are not passed to host PC
*Added support for Barc

__Changes since 1.03__
This release does not contain any fixes, just support for a newer flash memory chip.

Changes since f/w: 1.04
*Extended size of matrix.
**Each Receiver can now connect to a maximum number of 16 transmitter units
**Each Transmitter unit can now be connected to 256 receiver units
*Op

After January 2018, it is not possible to add new or factory reset endpoints to the AIM Manager due to a 32-bit rollover problem when generating 30 year SSL Certificates. They are required by both the

Changes since 4.9 f/w:
*Adds support for ALIF4000 V3.0 release which includes
**DisplayPort Audio – up to 8 channels on both heads
**Independent control of the transparent high-speed USB
**Sup

Changes since f/w v4.11.45012:
*After upgrading to 4.11, some receiver models (ALIF1002R, ALIF2020R, ALIF2000R) that were disconnected and were not previously running v4.9 firmware, will be completel

Changes since 4.11 f/w:
*Clearer on-screen instructions for RDP Login credential page for ALIF3000
*Removal of RDP transmitters from statistics page as they are not applicable
*Long Receiver names

This is update is for AIM-XX and ASP-001

Changes since v4.12/v4.13
- DeviceDaemon logging modified to prevent excessive log files sizes.
- System packages updated for Upgrade system for future re

''text''

FIxes:
- ALIF100T-VGA could not be added to the AIM Manager.