| Name | Type | Category |
|---|---|---|
| C-USB-LAN: Resetting | wiki | IP KVM |
| Cables for use with digital extenders | wiki | Extender |
| CATX-CAM: About | wiki | CATX |
| CATX: CATX-CONSOLE with a Network Switch | wiki | CATX |
| CATX: CATX1000 and CATX5000 Cascadablity | wiki | CATX |
| CATX1000: Getting Started | wiki | CATX |
| CATX1000: Learning the EDID | wiki | CATX |
| CATX4000: Getting Started | wiki | CATX |
| CATX4000: Learning the EDID | wiki | CATX |
| CATX4000: Upgrading the Firmware | wiki | CATX |
| CATX4000: Video Compensation | wiki | CATX |
| CATX5000: Getting Started | wiki | CATX |
|
CCS PRO: f/w v2.0.4728
Mouse Wheel not working on some mice in Free-Flow mode |
article | AV4PRO |
| CCS-MV 4224: Getting Started | wiki | CCS-MV 4224 |
|
CCS-MV4224 f/w1,2
__Changes since 1.1__ *Mouse lost when changing Presets *Mouse moves beyond the edge screen *Increasing Mouse speed locks the firmware __Known Issues__ *Cannot connect Infinity RX's directly to |
article | CCS-MV 4224 |
| CCS-MV4224: FAQ | wiki | CCS-MV 4224 |
|
CCS-PRO f/w v1.05: XDIP Compatibility
For full XDIP compatibility, upgrade to v2.0 or above, |
article | AV4PRO |
| CCS-PRO: Using the API | wiki | CCS-PRO |
| CCS-PRO: API Demo | wiki | CCS-PRO |
| CCS-PRO: Enabling and Disabling Free-Flow | wiki | CCS-PRO |
|
CCS-PRO: f/w 2.03.6566
This firmware release resolves the following issues: -Moving the mouse quickly between screens could cause the clicks to function on the previous host. -Implemented switches hotkey functionality th |
article | CCS-PRO |
|
ALIF: AIM - Event and Connection Log archive.
When upgrading the firmware, the Event and Connection logs are cleared. |
article | AdderLink Infinity |
|
ALIF: AIM - Using the 192.168.1.x network range.
Be careful if you are using the 192.168.1.x network range for endpoints. We have seen a problem where if an endpoint is given 192.168.1.42, it cannot be added to the AIM Manager. This is because 192.1 |
article | AdderLink Infinity |
|
ALIF: AIM - Web browser compatibility
Known to affect 4.x firmware. When configuring the AIM's web interface, it is recommended that you use an up to date web browser. If using Internet Explorer 11 or below, configuration pages like th |
article | AdderLink Infinity |