Name | Type | Category |
---|---|---|
ALIF: Cisco Network Switch configuration
We have had some instances where endpoints were not being seen properly by AIM when using a Cisco 3850 switch. Upon investigation, it was discovered that if the interfaces are left as default (i.e. no |
article | AdderLink Infinity |
ALIF: Endpoint f/w v4.6.41576
Fixes two issues from 4.5; losing USB with certain HP machines on reboot and having two transmitters video pointing to one receiver. |
article | AdderLink Infinity |
ALIF: Endpoints f/w v4.6.42069
Fixes an intermittent loss of USB, particularly when used in conjunction with a CCS-PRO. Requires CCS-PRO firmware upgrade. |
article | AdderLink Infinity |
ALIF: Endpoints f/w v4.9.44052
V4.9 is a maintenance release which has addressed issues with the OSD (On screen display) and USB support of newer devices. One new feature is the ability to stack the dual screen view via VNC on the |
article | AdderLink Infinity |
ALIF: Endpoints f/w v5.0.47185
__Products__ This firmware update is for the ALIF1002T/R, ALIF2000T/R, ALIF2002T, ALIF2020T/R and ALIF2112T __Changes since version v4.9__ *Fixed support for Elgato Stream Deck on latest software |
article | AdderLink Infinity |
ALIF3000 f/w 1.2.0.23
__Changes since v1,1__ *Added new VDI Viewers, VNC, HTML and Terminal (SSH) *ALIF1000/2000 range of products including support for CSS-PRO units, USB mass storage devices and many more NON HID devic |
article | ALIF3000 |
Test
ALIF: ALIF4001 & ALIF4021 f/w 6.06 Changes since 6.04 f/w: *UI becomes unusable with persistent "connection lost" if user password changed. This effected units in either the self-managed matrix mod |
article | ALIF4000 |
Testsdfgdf
ALIF: ALIF210x & ALIF212x f/w 6.06 Changes since 6.04 f/w: *UI becomes unusable with persistent "connection lost" if user password changed. This effected units in either the self-managed matrix mod |
article | ALIF2100 |
ALIF: AIM f/w v5.3.10026
This update is for AIM-XX and ASP-001 __Changes since v4.15__ *Added support for new ALIF2100 series *Automated login feature (Licensed Feature) *API updates – including AIM promotion, replaci |
article | AIM |
ALIF: ALIF100T-DP/DVI/VGA f/w v4.09.50000
Changes since v4.9.4000 *On boot the unit could revert back to link-local rather than use DHCP *Multicast Audio not working over multiple switches |
article | ALIF100T |
ALIF: ALIF100T-DV & ALIF100T-DP f/w 4.07.7
Bug Fixes: - Maximum bandwidth was limited to 750Mb/s now changed to 950Mb/s. - Protection against malformed multicast packets - Multicast traffic inbound filter - Memory leak when Statistics tu |
article | AdderLink Infinity |
ALIF: ALIF100T-VGA f/w 4.08.01
__Added Custom Mode timings__ Analogue video has many different resolutions and timings to have an exhaustive list of supported EDID. Also many modes can be close to other modes making it difficult t |
article | AdderLink Infinity |
ALIF: ALIF101T-DP, ALIF101T-DVI & ALIF101T-HDMI f/w 4.09.09
__Changes since 5.0.47405__ *No video after restart of MacPro -2013 *EDID processing incorrectly using cea values for hdmi processing *EDID presents 640x350 as only detailed mode (Asus VP28U monito |
article | ALIF101T |
ALIF: ALIF2100 & ALIF2122 f/w v8.00
__Changes since 7.02__ *Added ALIF11xx Single Head Units *Laggy mouse when Tx connected to linux KVM hypervisor *Occasional stutter in digital audio caused by receiver __Known Issues__ * Video |
article | ALIF2102 |
ALIF: ALIF2100 & ALIF2122 f/w v8.00
__Changes since 7.02__ *Added ALIF11xx Single Head Units *Laggy mouse when Tx connected to linux KVM hypervisor *Occasional stutter in digital audio caused by receiver __Known Issues__ * Video |
article | ALIF2100 |
ALIF: ALIF210x & ALIF212x f/w 6.04
Changes since 5.04 f/w: *Video doesn't come back on 2nd head if monitor is turned off and back on *Need to turn auto negotiate to OFF(None) for SFP’s on network switches *RX unable to communicate |
article | ALIF2100 |
ALIF: ALIF210x & ALIF212x f/w 7.02
__Changes since 6.06 f/w:__ *Last frame frozen and UI notification feature *Auto Logout feature *Use saved monitors EDID feature *Rebooting RX should not cause TX to lose USB descriptor *USB Seri |
article | ALIF2100 |
ALIF: ALIF3000 - Upgrade Issue
The ALIF3000 can only be upgraded via the AIM Manager. We are aware of any issue with AIM v4.11 and below where an upgrade will unexpectedly fail. Make sure that you have not set the AIM to __Use SSL_ |
article | ALIF3000 |
ALIF: ALIF3000 f/w 1.01
Changes since 1.0.1: *Added Microphone support for RDP *Added feature to make the banner movable to 6 positions *Backup firmware version was not reported to AIM. *Audio volume was not set correctl |
article | ALIF3000 |
ALIF: ALIF3000 f/w 1.1.0
__Prerequeistes__ This update requires that the AIM Manager is running v4.12 or above. __New Features__ *The 3rd copper network interface can be Static or allocated DHCP. This is set via the AIM |
article | ALIF3000 |
ALIF: ALIF4001 & ALIF4021 f/w 5.05
Changes since 4.02 f/w: |
article | ALIF4000 |
ALIF: ALIF4001 & ALIF4021 f/w 7.02
__Changes since 6.06 f/w:__ *Last frame frozen and UI notification feature *Auto Logout feature *Use saved monitors EDID feature *Rebooting RX should not cause TX to lose USB descriptor *Laggy mo |
article | ALIF4000 |
ALIF: ALIF4021 f/w 1.01
Changes since 1.0 f/w: - Fixed: Updating of the UI Settings failed, triggering a RETRY and CONFLICT before updating - Fixed: USB not functional when ALIF4000 RX is connected to ALIF TX (ALIF1002, AL |
article | AdderLink Infinity |