Loading...
 
CapsLock is on.
 
List Articles View Articles
Products »  Digital Matrix »  AdderLink Infinity »  ALIF3000

ALIF: ALIF3000 - Upgrade Issue

Published 02-10-2020 17:32
Known Issue

The ALIF3000 can only be upgraded via the AIM Manager. We are aware of any issue with AIM v4.11 and below where an upgrade will unexpectedly fail. Make sure that you have not set the AIM to Use SSL for its web interface, this is where you use https rather than http to access the AIM. The setting is found under Dashboard -> Settings -> Network -> Use SSL. If you have, temporary turn off the feature, upgrade the ALIF3000(s) and then turn it back on again afterwards.

Search

Menu

  • Home
  • Go to Adder.com
  • Articles (News)
  • Manuals
  • List Wiki Pages
  • Getting Started
  • Infinity Getting Started
  • Contact Support

Most Viewed

  1. HomePage
  2. ALIF: FAQ
  3. ALIF: Understanding DHCP Option 125
  4. ALIF: Successful Implementation
  5. ALIF: Accessing an Endpoint (TX or RX) Directly
  6. ALIF: Migrating from the 1st to 2nd generation AIM Manager
  7. Product Manuals
  8. ALIF: API
  9. ALIF: How to Manually Factory Reset an Endpoint (Transmitter or Receiver)
  10. DDX: Using the API
  11. ALIF: Upgrading the Firmware on a Transmitter or Receiver
  12. ALIF: Advanced USB Features
  13. ALIF: AIM Controller - API Demo
  14. ALIF: Compatibility Matrix
  15. ALIF: Network Redundancy Example
  16. ALIF: How do I enable Backup mode on an Endpoint (TX or RX)
  17. ALIF: Adding Backup and Satellite AIM's
  18. ALIF: AIM Manager
  19. ALIF: How to Factory Reset an AIM Manager
  20. ALIF: Enabling Remote Support


Copyright 2021 - Adder Technology - https://www.adder.com