Loading...
 

Category: AdderLink Infinity

AdderLink Infinity
Hide subcategories objects

..
Name Type Category
ALIF: AIM - Backup AIM not adding to the Primary when using HTTPS
Affects AIM f/w v4.7 and below on writing.

We have found a problem where it is not possible to add a backup AIM Manager if you have configured AIM to use an HTTPS connection.
article AdderLink Infinity
ALIF: AIM - Event and Connection Log archive.
When upgrading the firmware, the Event and Connection logs are cleared.
article AdderLink Infinity
ALIF: AIM - Using the 192.168.1.x network range.
Be careful if you are using the 192.168.1.x network range for endpoints. We have seen a problem where if an endpoint is given 192.168.1.42, it cannot be added to the AIM Manager. This is because 192.1
article AdderLink Infinity
ALIF: AIM - Web browser compatibility
Known to affect 4.x firmware.

When configuring the AIM's web interface, it is recommended that you use an up to date web browser. If using Internet Explorer 11 or below, configuration pages like th
article AdderLink Infinity
ALIF: AIM f/w 4.7
article AdderLink Infinity
ALIF: AIM f/w v3.5.42099 - Critical Update
After January 2018, it is not possible to add new or factory reset endpoints to the AIM Manager due to a 32-bit rollover problem when generating 30 year SSL Certificates. They are required by both the
article AdderLink Infinity
ALIF: AIM f/w v4.11.45012
Changes since 4.9 f/w:
*Adds support for ALIF4000 V3.0 release which includes
**DisplayPort Audio – up to 8 channels on both heads
**Independent control of the transparent high-speed USB
**Sup
article AIM
ALIF: AIM f/w v4.11.45022 (Hotfix)
Changes since f/w v4.11.45012:
*After upgrading to 4.11, some receiver models (ALIF1002R, ALIF2020R, ALIF2000R) that were disconnected and were not previously running v4.9 firmware, will be completel
article AIM
ALIF: AIM f/w v4.12.10041
Changes since 4.11 f/w:
*Clearer on-screen instructions for RDP Login credential page for ALIF3000
*Removal of RDP transmitters from statistics page as they are not applicable
*Long Receiver names
article AIM
ALIF: AIM f/w v4.15.10005
This is update is for AIM-XX and ASP-001

Changes since v4.12/v4.13
- DeviceDaemon logging modified to prevent excessive log files sizes.
- System packages updated for Upgrade system for future re
article AIM
ALIF: AIM f/w v4.8.42924
''text''
article AdderLink Infinity
ALIF: AIM f/w v4.8.43178
FIxes:
- ALIF100T-VGA could not be added to the AIM Manager.
article AdderLink Infinity
ALIF: AIM f/w v4.9.3435
Features:-
- Support for the new ALIF4021R and ALIF4021T 4k Infinity endpoints.
article AdderLink Infinity
ALIF: ALIF100T-DV & ALIF100T-DP f/w 4.07.7
Bug Fixes:
- Maximum bandwidth was limited to 750Mb/s now changed to 950Mb/s.
- Protection against malformed multicast packets
- Multicast traffic inbound filter
- Memory leak when Statistics tu
article AdderLink Infinity
ALIF: ALIF100T-VGA f/w 4.08.01
__Added Custom Mode timings__
Analogue video has many different resolutions and timings to have an exhaustive list of supported EDID. Also many modes can be close to other modes making it difficult t
article AdderLink Infinity
ALIF: ALIF3000 - Upgrade Issue
The ALIF3000 can only be upgraded via the AIM Manager. We are aware of any issue with AIM v4.11 and below where an upgrade will unexpectedly fail. Make sure that you have not set the AIM to __Use SSL_
article ALIF3000
ALIF: ALIF3000 f/w 1.01
Changes since 1.0.1:
*Added Microphone support for RDP
*Added feature to make the banner movable to 6 positions
*Backup firmware version was not reported to AIM.
*Audio volume was not set correctl
article ALIF3000
ALIF: ALIF3000 f/w 1.1.0
__Prerequeistes__
This update requires that the AIM Manager is running v4.12 or above.

__New Features__
*The 3rd copper network interface can be Static or allocated DHCP. This is set via the AIM
article ALIF3000
ALIF: ALIF4021 f/w 1.01
Changes since 1.0 f/w:
- Fixed: Updating of the UI Settings failed, triggering a RETRY and CONFLICT before updating
- Fixed: USB not functional when ALIF4000 RX is connected to ALIF TX (ALIF1002, AL
article AdderLink Infinity
ALIF: ALIF4021 f/w 4.01
Changes since 3.01 f/w:
*Added a workaround for an error in the EDID of a LG Ultrawide 38UC99 monitor (3840 x 1660) which did not display video unless active sync is enabled.
*Rebooting the AIM Mana
article ALIF4000
ALIF: ALIF4021: f/w 3.01
Changes since 3.01 f/w:
*Extended channel hotkeys (0-99). Requires AIM version v4.11.45021
*Support for Channel Banner positioning from AIM.
*Device status for the DP Audio and Transparent USB co
article ALIF4000
ALIF: ALIF4021:f/w 2.02
Changes since 1.1 f/w:

__New Feature:__
*Transparent USB2.0 High-speed link The ALIF4000 contains hardware that allows a full 480Mbps USB2.0 high-speed point to point link to be formed. In this V2
article AdderLink Infinity
ALIF: ALIF4021:f/w 3.00
Changes since 1.1 f/w:

__New Feature:__
*Support for 5k resolutions, including
**5120 x 2880@30hz
**5120 x 2160@30hz
**5120 x 1440@60hz
*High Frame Rate Support. Up to 240Hz (1920x1080)
*Di
article ALIF4000
  • «
  • 1 (current)
  • 2