Categories

__Changes since f/w: 4.0__
- Adheres to California IoT regulation.
- Support for keyboard F13 to F15 keys.
- Updated the USB VID/PID to use official Adder Values
- You can now upgrade on an HTTP

Changes since f/w: 4.3:
*The local mouse pointer can be optionally changed from a dot to an arrow. The setting is found in the Advanced Unit Configuration page.

Affects AIM f/w v4.7 and below on writing.

We have found a problem where it is not possible to add a backup AIM Manager if you have configured AIM to use an HTTPS connection.

When upgrading the firmware, the Event and Connection logs are cleared.

Be careful if you are using the 192.168.1.x network range for endpoints. We have seen a problem where if an endpoint is given 192.168.1.42, it cannot be added to the AIM Manager. This is because 192.1

Known to affect 4.x firmware.

When configuring the AIM's web interface, it is recommended that you use an up to date web browser. If using Internet Explorer 11 or below, configuration pages like th

After January 2018, it is not possible to add new or factory reset endpoints to the AIM Manager due to a 32-bit rollover problem when generating 30 year SSL Certificates. They are required by both the

Changes since 4.9 f/w:
*Adds support for ALIF4000 V3.0 release which includes
**DisplayPort Audio – up to 8 channels on both heads
**Independent control of the transparent high-speed USB
**Sup

Changes since f/w v4.11.45012:
*After upgrading to 4.11, some receiver models (ALIF1002R, ALIF2020R, ALIF2000R) that were disconnected and were not previously running v4.9 firmware, will be completel

Changes since 4.11 f/w:
*Clearer on-screen instructions for RDP Login credential page for ALIF3000
*Removal of RDP transmitters from statistics page as they are not applicable
*Long Receiver names

''text''

FIxes:
- ALIF100T-VGA could not be added to the AIM Manager.

Features:-
- Support for the new ALIF4021R and ALIF4021T 4k Infinity endpoints.