Summary
You have been directed by Support to this page for the following reasons:-
- You have some endpoints offline and they will no longer connect to the AIM.
- It is after the 3rd of October 2024
- You have not patched your ADDERLink INFINITY system in relation to the Address Assignment Timeout.
How might my system be affected?
AIM has a built-in security protection mechanism that prevents uncertified devices from joining the system. From 3rd October 2024 current systems will not certify without the appropriate upgrade, which could lead to the following symptoms occurring.
- Prevent customers from adding transmitters and receivers to their matrix system (New or Factory Reset).
- Prevent customers from adding AIM servers to their matrix system (New or Factory Reset).
- Cause transmitters and receivers to cease all communication with AIM and each other should they be assigned a new IP address, either by AIM or by a 3rd party DHCP server. This change in behaviour causes functional symptoms. It does not reduce the security level of your ADDERLink INFINITY system.
Steps
- Complete the online form to obtain specific instructions on how to upgrade your ADDERLink INFINITY system. Make sure you specify the system that you are having the issue with. If you have already completed the form and received your instructions, please progress to Step 2.
Each ADDERLink INFINITY system may require a different update depending on several factors. To be guided to the relevant firmware updates and instructions for your systems, please navigate to the URL below. https://www.adder.com/en/address-assignment-timeout
When you complete the form you will be emailed an appropriate link for your system including full instructions and routes to download firmware.
- Upgrade your ADDERLink Infinity system as detailed in the instructions. (If you have already upgraded your ADDERLink Infinity system, please progress to Step 3)
- Manually upgrade offline endpoints
Offline endpoints (except ALIF3000) will need to be upgraded via their web interfaces before they can be added back to AIM. The web interface can be accessed by connecting a computer directly to the endpoints network ports.
- Factory reset the endpoint. NOTE: This does not clear their settings on the AIM.
- See the Upgrading the Firmware on a Transmitter or Receiver.
- After the endpoint has been upgraded to a patched firmware version, you can add it back to the Infinity network. The Endpoint will reconnect to the AIM Manager and will be automatically configured.
ALIF3000s
The ALIF3000 contains a real-time clock and can only be upgraded via an AIM Manager. If it is not running a patched version of firmware, you will need to contact support for assistance.