Category: AdderLink Infinity

AdderLink Infinity
Show subcategories objects

Name Type
AIM f/w v5.4.10029
This update is for AIM-24 and ASP-001

__Changes since v5.3__
*Hotkey timeout even when logged in after 15 mins (v5.3)
*Units reporting online when backup file restore even when none are present
ALIF: AIM - Backup AIM not adding to the Primary when using HTTPS
Affects AIM f/w v4.7 and below on writing.

We have found a problem where it is not possible to add a backup AIM Manager if you have configured AIM to use an HTTPS connection.
ALIF: AIM - Event and Connection Log archive.
When upgrading the firmware, the Event and Connection logs are cleared.
ALIF: AIM - Using the 192.168.1.x network range.
Be careful if you are using the 192.168.1.x network range for endpoints. We have seen a problem where if an endpoint is given, it cannot be added to the AIM Manager. This is because 192.1
ALIF: AIM - Web browser compatibility
Known to affect 4.x firmware.

When configuring the AIM's web interface, it is recommended that you use an up to date web browser. If using Internet Explorer 11 or below, configuration pages like th
ALIF: AIM f/w 4.7
ALIF: AIM f/w v3.5.42099 - Critical Update
After January 2018, it is not possible to add new or factory reset endpoints to the AIM Manager due to a 32-bit rollover problem when generating 30 year SSL Certificates. They are required by both the
ALIF: AIM f/w v4.8.42924
ALIF: AIM f/w v4.8.43178
- ALIF100T-VGA could not be added to the AIM Manager.
ALIF: AIM f/w v4.9.3435
- Support for the new ALIF4021R and ALIF4021T 4k Infinity endpoints.
ALIF: ALIF100T-DV & ALIF100T-DP f/w 4.07.7
Bug Fixes:
- Maximum bandwidth was limited to 750Mb/s now changed to 950Mb/s.
- Protection against malformed multicast packets
- Multicast traffic inbound filter
- Memory leak when Statistics tu
ALIF: ALIF100T-VGA f/w 4.08.01
__Added Custom Mode timings__
Analogue video has many different resolutions and timings to have an exhaustive list of supported EDID. Also many modes can be close to other modes making it difficult t
ALIF: ALIF4021 f/w 1.01
Changes since 1.0 f/w:
- Fixed: Updating of the UI Settings failed, triggering a RETRY and CONFLICT before updating
- Fixed: USB not functional when ALIF4000 RX is connected to ALIF TX (ALIF1002, AL
ALIF: ALIF4021:f/w 2.02
Changes since 1.1 f/w:

__New Feature:__
*Transparent USB2.0 High-speed link The ALIF4000 contains hardware that allows a full 480Mbps USB2.0 high-speed point to point link to be formed. In this V2
ALIF: Cisco Network Switch configuration
We have had some instances where endpoints were not being seen properly by AIM when using a Cisco 3850 switch. Upon investigation, it was discovered that if the interfaces are left as default (i.e. no
ALIF: Endpoint f/w v4.6.41576
Fixes two issues from 4.5; losing USB with certain HP machines on reboot and having two transmitters video pointing to one receiver.
ALIF: Endpoints f/w v4.6.42069
Fixes an intermittent loss of USB, particularly when used in conjunction with a CCS-PRO. Requires CCS-PRO firmware upgrade.
ALIF: Endpoints f/w v4.9.44052
V4.9 is a maintenance release which has addressed issues with the OSD (On screen display) and USB support of newer devices.
One new feature is the ability to stack the dual screen view via VNC on the
ALIF: Endpoints f/w v5.0.47185
This firmware update is for the ALIF1002T/R, ALIF2000T/R, ALIF2002T, ALIF2020T/R and ALIF2112T

__Changes since version v4.9__
*Fixed support for Elgato Stream Deck on latest software
  • «
  • 1 (current)
  • 2