Category: Products

Mouse Wheel not working on some mice in Free-Flow mode

__Changes since 1.1__
*Mouse lost when changing Presets
*Mouse moves beyond the edge screen
*Increasing Mouse speed locks the firmware

__Known Issues__
*Cannot connect Infinity RX's directly to

For full XDIP compatibility, upgrade to v2.0 or above,

This firmware release resolves the following issues:
-Moving the mouse quickly between screens could cause the clicks to function on the previous host.
-Implemented switches hotkey functionality th

This update contains the following:-
- Added the ability for the CCS-XB LED's to work in non-Free-Flow mode.
- Fixed an issue where the LED brightness level was not maintained if you reconnected the

An intermittent loss of USB and a reboot has been observed when moving the Free-Flow mouse rapidly to the left and right whilst the ALIF receivers are also doing their channel changes

This firmware release resolves the following issues:
- Stability when working with ALIF receivers.
- Resilience to the loss of the LED's when working with the CC-XB
- Change in behaviour of the net

__Changes since version v2.04__
*Improved reliability, where regularly exchanging keyboards and mice for hygiene reasons could cause the CCS-PRO to lock-up.

Changes since version v2.05
*

This update allows screen configurations where one screen can span across six.

The Free-Flow feature on CCS-PRO requires that the host operating system can support an absolute mouse. This is where the mouse tells the host computer where the pointer is on the screen.

Up until

__Changes since 3.13__
*Patch for is susceptible to CVE-2016-8863 vulnerability

New features and bug fixes.

Features include:-
- Reconnect console to the same source after a power cycle
- Change DHCP implementation for startup
- Touchscreen launch of OSD
- User configurab

Added support for Promess Touchscreens and USB Joysticks. Improved audio performance frequency response.

Fixed the following issues:-
*Sideways scroll doesn't work with Apple mouse with MacOS
*Unified Keyboard and Mouse not working

Added support for the new IPEPS+

Fixed the following issue:-
- When re-assigning ports and using the Preset function to store the connection state, it was possible on power on that the configuration appeared to have been lost or the

For DDX30 and DDX10

This firmware release adds the ability to disable the USB audio on the DDX-CAM modules.

For DDX30 and DDX10

This release fixes an issue where the DDX-CAM modules failed to upgrade when trying to upgrade to the previous firmware release (v3.09). Note: The switch will upgrade to v3.1

Changes since f/w: 4.0
- F13 to F15 still not work from local keyboard but not over VNC on a Mac

Changes since f/w: 4.3:
*The local mouse pointer can be optionally changed for a dot to an arrow. The setting is found in the Advanced Unit Configuration page.
*OSD on the IPEPS-DA was not working

Changes since f/w: 2.0

- Option to turn off High-Speed USB to work with the ALIF100T.
-

__Changes since v2.09__
*Fixed USB not working with XDIP
*Mac startup keys not working. Made some improvements. See [https://support.adder.com/tiki/tiki-index.php?page=IPEPS-PLUS%3A+FAQ&highlight=fa

After January 2018, it is not possible to add new or factory reset endpoints to the AIM Manager due to a 32-bit rollover problem when generating 30 year SSL Certificates. They are required by both the

Changes since 4.9 f/w:
*Adds support for ALIF4000 V3.0 release which includes
**DisplayPort Audio – up to 8 channels on both heads
**Independent control of the transparent high-speed USB
**Sup