Loading...
 

Categories

Hide subcategories objects

Name Type Category
IPEPS-PLUS: f/w 2.13
__Changes since v2.09__
*Fixed USB not working with XDIP
*Mac startup keys not working. Made some improvements. See [https://support.adder.com/tiki/tiki-index.php?page=IPEPS-PLUS%3A+FAQ&highlight=fa
article IPEPS-PLUS
IPEPS+: f/w 2.0
article IPEPS-PLUS
IPEPS+: VNC Absolute mouse not working with DDX
The latest v2 firmware for the IPEPS+ adds Virtual Media support. The new function is not compatible with the DDX and as a result, also causes the mouse to stop working if you use Absolute mode. Dis
article IPEPS-PLUS
Log4j Vulnerability Statement
Having reviewed the software that Adder Technology Ltd develops for use in its range of high-performance KVM extenders and switches, we are able to state that none of our proprietary software includes
article General
Prism: End of Life
The following products are end of life with immediate effect. The EOL part numbers and recommended replacements are shown in the following table.
article Prism
RED-PSU: API now available
The API (Application Programming Interface) for the Redundant Power Supply (RED-PSU) is now available.
article RED-PSU
XD150FX: f/w 1.03
Changes since f/w: 1.03
- EDID is parsed to ensure that no unsupported modes are included before passing them to the host.
- Fixed Video Input Definition byte in EDID
- Add support for GigaLight 1
article XD150FX
XD150FX: f/w 1.03
Changes since f/w: 1.03
*FIxed a web 404 error when navigating the interface
*Rebooting lost the video on some hosts.
article XD150FX
XD150FX: f/w 1.06
Changes to f/w: 1.05
*Video blanking on new RX PCBs
article XD150FX
XD612: f/w: 1.04
*TX local feed-through daisy chain with Dell U2415 DP1.2 video doesn’t recover if the TX is rebooted
*Local video timings are not calculated correctly if the source video was not connected.
*Video
article XD600
XD614: f/w: 1.04
*Upgrade failure observed about 1 in 5 attempts
*Local video timings are not calculated correctly if the source video was not connected.
*XD614 Video loss after a period time-Link led on RX blinking
article XD600
XD614: f/w: 1.05
Changes since 1.04 f/w:
*Resolved: DP1 Link Oversubscribed error when monitors are reconnected to a MST hub
*Resolved: Missing video when local display is connected to a MST transmitter
*Resolved:
article XD600
XD641: f/w: 1.04
*Local Video timings are not calculated correctly
*Video loss after being in use for a period of time
*Restarting a Mac can cause the Tx to crash
article XD600
XD641: f/w: 1.05
Changes since 1.04 f/w:
*The monitor's EDID is manipulated if reported above 8-bit colour to ensure compatibility.
*Resolved: Mouse scroll wheel events are not passed to host PC
*Added support for
article XD600
XD642: f/w: 1.04
*Local Video timings are not calculated correctly
*Video loss after being in use for a period of time
*Restarting a Mac can cause the Tx to crash
article XD600
XD642: f/w: 1.05
Changes since 1.04 f/w:
*Fixed: Video occasionally blanks out
*Fixed: Displays sometimes lost upon server reboot
*Fixed: Mouse scroll wheel events are not passed to host PC
*Added support for Barc
article XD600
ALIF: ALIF100T-DV & ALIF100T-DP f/w 4.07.7
Bug Fixes:
- Maximum bandwidth was limited to 750Mb/s now changed to 950Mb/s.
- Protection against malformed multicast packets
- Multicast traffic inbound filter
- Memory leak when Statistics tu
article AdderLink Infinity
ALIF: ALIF100T-VGA f/w 4.08.01
__Added Custom Mode timings__
Analogue video has many different resolutions and timings to have an exhaustive list of supported EDID. Also many modes can be close to other modes making it difficult t
article AdderLink Infinity
ALIF: ALIF3000 - Upgrade Issue
The ALIF3000 can only be upgraded via the AIM Manager. We are aware of any issue with AIM v4.11 and below where an upgrade will unexpectedly fail. Make sure that you have not set the AIM to __Use SSL_
article ALIF3000
ALIF: ALIF3000 f/w 1.01
Changes since 1.0.1:
*Added Microphone support for RDP
*Added feature to make the banner movable to 6 positions
*Backup firmware version was not reported to AIM.
*Audio volume was not set correctl
article ALIF3000
ALIF: ALIF3000 f/w 1.1.0
__Prerequeistes__
This update requires that the AIM Manager is running v4.12 or above.

__New Features__
*The 3rd copper network interface can be Static or allocated DHCP. This is set via the AIM
article ALIF3000
ALIF: ALIF4001 & ALIF4021 f/w 5.05
Changes since 4.02 f/w:
article ALIF4000
ALIF: ALIF4021 f/w 1.01
Changes since 1.0 f/w:
- Fixed: Updating of the UI Settings failed, triggering a RETRY and CONFLICT before updating
- Fixed: USB not functional when ALIF4000 RX is connected to ALIF TX (ALIF1002, AL
article AdderLink Infinity
ALIF: ALIF4021 f/w 4.01
Changes since 3.01 f/w:
*Added a workaround for an error in the EDID of a LG Ultrawide 38UC99 monitor (3840 x 1660) which did not display video unless active sync is enabled.
*Rebooting the AIM Mana
article ALIF4000