Name | Type | Category |
---|---|---|
XD612: f/w: 1.11 | article | XD600 |
XD612: f/w: 1.04
*TX local feed-through daisy chain with Dell U2415 DP1.2 video doesn’t recover if the TX is rebooted *Local video timings are not calculated correctly if the source video was not connected. *Video |
article | XD600 |
XD614: f/w: 1.04
*Upgrade failure observed about 1 in 5 attempts *Local video timings are not calculated correctly if the source video was not connected. *XD614 Video loss after a period time-Link led on RX blinking |
article | XD600 |
XD614: f/w: 1.05
Changes since 1.04 f/w: *Resolved: DP1 Link Oversubscribed error when monitors are reconnected to a MST hub *Resolved: Missing video when local display is connected to a MST transmitter *Resolved: |
article | XD600 |
XD641: f/w: 1.04
*Local Video timings are not calculated correctly *Video loss after being in use for a period of time *Restarting a Mac can cause the Tx to crash |
article | XD600 |
XD641: f/w: 1.05
Changes since 1.04 f/w: *The monitor's EDID is manipulated if reported above 8-bit colour to ensure compatibility. *Resolved: Mouse scroll wheel events are not passed to host PC *Added support for |
article | XD600 |
XD642: f/w: 1.04
*Local Video timings are not calculated correctly *Video loss after being in use for a period of time *Restarting a Mac can cause the Tx to crash |
article | XD600 |
XD642: f/w: 1.05
Changes since 1.04 f/w: *Fixed: Video occasionally blanks out *Fixed: Displays sometimes lost upon server reboot *Fixed: Mouse scroll wheel events are not passed to host PC *Added support for Barc |
article | XD600 |
Changes since v1.04
*Fixed: DP1 Link Oversubscribed error when monitors are reconnected to a MST hub
*Fixed: Missing video when local displa