Category: Extender

Note: It is not possible to downgrade once upgraded.

Changes since v1.04
*Fixed: DP1 Link Oversubscribed error when monitors are reconnected to a MST hub
*Fixed: Missing video when local displa

Changes since f/w: 1.03
- EDID is parsed to ensure that no unsupported modes are included before passing them to the host.
- Fixed Video Input Definition byte in EDID
- Add support for GigaLight 1

Changes since f/w: 1.03
*FIxed a web 404 error when navigating the interface
*Rebooting lost the video on some hosts.

Changes to f/w: 1.05
*Video blanking on new RX PCBs

*TX local feed-through daisy chain with Dell U2415 DP1.2 video doesn’t recover if the TX is rebooted
*Local video timings are not calculated correctly if the source video was not connected.
*Video

*Upgrade failure observed about 1 in 5 attempts
*Local video timings are not calculated correctly if the source video was not connected.
*XD614 Video loss after a period time-Link led on RX blinking

Changes since 1.04 f/w:
*Resolved: DP1 Link Oversubscribed error when monitors are reconnected to a MST hub
*Resolved: Missing video when local display is connected to a MST transmitter
*Resolved:

*Local Video timings are not calculated correctly
*Video loss after being in use for a period of time
*Restarting a Mac can cause the Tx to crash

Changes since 1.04 f/w:
*The monitor's EDID is manipulated if reported above 8-bit colour to ensure compatibility.
*Resolved: Mouse scroll wheel events are not passed to host PC
*Added support for

*Local Video timings are not calculated correctly
*Video loss after being in use for a period of time
*Restarting a Mac can cause the Tx to crash

Changes since 1.04 f/w:
*Fixed: Video occasionally blanks out
*Fixed: Displays sometimes lost upon server reboot
*Fixed: Mouse scroll wheel events are not passed to host PC
*Added support for Barc