XD600: f/w 1.13

Previous versions

• XD614 – v1.10
• XD641 – v1.10
• XD642 – v1.12

• Keyboard issues in the BIOS with XD642
• Upgrade hangs at 99%
• Hot keys are passed through to the host O/S
• XD642 DP link oversubscribed when using Dual 4K, 3840x2160@46 on second head
• 4K DCI monitor resets Rx when switched to DP1.1 mode - video does not return
• Upgrade could fail if video streams changed
• OSD is not in a consistent position
• OSD may close unexpectedly
• Video loss indication sometimes causes a red screen
• EDID preferred timing may be incorrect
• Reports an error when using a copper SFP on unsupported hardware
• Power LED changes state too quickly
• Audio goes into a sleep mode
• Some HID devices do not provide input report data. Polling these may not work correctly.
• Warnings and errors will be raised and displayed on the OSD, then close after 10 secs.
• Allow forced upgrades of external Flash devices
• Update video freeze OSD indication
• EDID Display ID data blocks not processed correctly
• DisplayPort audio to analogue mapping
• Video freeze detect feature
• Loss of video when rebooting Tx or disconnecting displays from Rx
• Limit EDID to reported DP receiver capabilities
• Dell P2418HT Touch screen is intermittent.
• Add support for virtual USB device drivers
• Connection Link improvements
• Improve USB memory management
• Audio input can cause Rx to lock up
• WACOM DTH2420 - USB Lost on RX power cycle
• OSD is corrupted at 640x480@60Hz
• Support 10G copper SFP

• Mac function/media keys map incorrectly - Expected behaviour
• Hotplugging LG 4K monitor breaks EDID - Workaround – reboot TX
• USB device enumeration speeds - as expected but slow compared to direct to PC - Expected of USB Full-Speed limitation
• XD612 performance of copy speeds - as expected but slow compared to direct to PC - Expected of USB Full-Speed limitation
• Ubuntu Nouveau display driver unreliable with MST - Nvidia proprietary drivers should be used on Ubuntu/Linux with XD612 and XD614
• RX intermittently fails to display one head after reset (~1/10) - Workaround – reboot RX
• Unable to support 4k60p and 1080p behind MST hub - MST hub issue (Delock DP1.4 Splitter)
• Video and USB not restoring after Win11 reboot < 1 in 200 - Workaround – reboot RX
• Video flickering at 59Hz with MST - Workaround – force 60Hz refresh rate on host
• Infrequent USB dropouts with Win11 ~1 in 100 - Workaround – reboot TX
• Not working properly with 4x 4K monitors - Issue with MST and OS/Hub Use one of our recommended MST Hubs