| Name | Type | Category |
|---|---|---|
| ALIF: ALIF3000 f/w 1.01 | article | ALIF3000 |
|
ALIF: ALIF3000 f/w 1.1.0
__Prerequeistes__ This update requires that the AIM Manager is running v4.12 or above. __New Features__ *The 3rd copper network interface can be Static or allocated DHCP. This is set via the AIM |
article | ALIF3000 |
| ALIF: ALIF3000 FAQ | wiki | ALIF3000 |
| ALIF: ALIF3000 Getting a Debug File | wiki | ALIF3000 |
| ALIF: ALIF4000 "MiniMatrix" Quick Start Guide | wiki | ALIF4000 |
| ALIF: ALIF4000 FAQ | wiki | ALIF4000 |
|
ALIF: ALIF4001 & ALIF4021 f/w 5.05
Changes since 4.02 f/w: |
article | ALIF4000 |
|
ALIF: ALIF4001 & ALIF4021 f/w 7.02
__Changes since 6.06 f/w:__ *Last frame frozen and UI notification feature *Auto Logout feature *Use saved monitors EDID feature *Rebooting RX should not cause TX to lose USB descriptor *Laggy mo |
article | ALIF4000 |
|
ALIF: ALIF4021 f/w 1.01
Changes since 1.0 f/w: - Fixed: Updating of the UI Settings failed, triggering a RETRY and CONFLICT before updating - Fixed: USB not functional when ALIF4000 RX is connected to ALIF TX (ALIF1002, AL |
article | AdderLink Infinity |
|
ALIF: ALIF4021 f/w 4.01
Changes since 3.01 f/w: *Added a workaround for an error in the EDID of a LG Ultrawide 38UC99 monitor (3840 x 1660) which did not display video unless active sync is enabled. *Rebooting the AIM Mana |
article | ALIF4000 |
|
ALIF: ALIF4021 f/w 6.04
Changes since 5.05 f/w: *Need to turn auto negotiate to OFF(None) for SFP’s on network switches *RX unable to communicate with TX in multi subnet matrix (Self-managed mode) *DHCP classless routes |
article | ALIF2100 |
|
ALIF: ALIF4021: f/w 3.01
Changes since 3.01 f/w: *Extended channel hotkeys (0-99). Requires AIM version v4.11.45021 *Support for Channel Banner positioning from AIM. *Device status for the DP Audio and Transparent USB co |
article | ALIF4000 |
|
ALIF: ALIF4021:f/w 2.02
Changes since 1.1 f/w: __New Feature:__ *Transparent USB2.0 High-speed link The ALIF4000 contains hardware that allows a full 480Mbps USB2.0 high-speed point to point link to be formed. In this V2 |
article | AdderLink Infinity |
|
ALIF: ALIF4021:f/w 3.00
Changes since 1.1 f/w: __New Feature:__ *Support for 5k resolutions, including **5120 x 2880@30hz **5120 x 2160@30hz **5120 x 1440@60hz *High Frame Rate Support. Up to 240Hz (1920x1080) *Di |
article | ALIF4000 |
| ALIF: API | wiki | AdderLink Infinity |
| ALIF: Changing the AIM Manager from Solo to Primary | wiki | AIM |
|
ALIF: AIM - Event and Connection Log archive.
When upgrading the firmware, the Event and Connection logs are cleared. |
article | AdderLink Infinity |
|
ALIF: AIM - Using the 192.168.1.x network range.
Be careful if you are using the 192.168.1.x network range for endpoints. We have seen a problem where if an endpoint is given 192.168.1.42, it cannot be added to the AIM Manager. This is because 192.1 |
article | AdderLink Infinity |
|
ALIF: AIM - Web browser compatibility
Known to affect 4.x firmware. When configuring the AIM's web interface, it is recommended that you use an up to date web browser. If using Internet Explorer 11 or below, configuration pages like th |
article | AdderLink Infinity |
| ALIF: AIM ASP-001 Power Button | wiki | AIM |
| ALIF: AIM Controller - API Demo | wiki | AdderLink Infinity |
| ALIF: AIM Controller - Exporting Serial Numbers | wiki | AdderLink Infinity |
*Added Microphone support for RDP
*Added feature to make the banner movable to 6 positions
*Backup firmware version was not reported to AIM.
*Audio volume was not set correctl